HEBEI FENGMING PLASTIC PRODUCTS CO., LTD.
PHONE:+86-19832136619
TEL:+86-311-85851653
FAX:+86-319-3252989
E-mail:contact@fmseal.com
ADD:Yawo Village, Changzhuang Township, Wei County
Contact
Copyright: Hebei Fengming Plastic Products Co., Ltd. 冀ICP备13011107号-1 Powered by:300.cn
Navigation
NEWS CENTER
Contact
ADD:Yawo Village, Changzhuang Township, Wei County
TEL:+86-311-85851653
FAX:+86-319-3252989
E-mail:contact@fmseal.com
HEBEI FENGMING PLASTIC PRODUCTS CO., LTD.
Our company has accumulated rich experience and made outstanding achievements in the design and development of sealing strips for automobiles, high-speed rail, subways, containers, refrigerated trucks, ships, building doors and windows, industrial equipment, etc.
Installation of door and window seals
Source:
Release time:
2020/04/24
Page view
[Abstract]:
(Window frame, sash) After welding and cleaning the corner, the door and window sealing strip should be pushed in the profile groove with a special roller in the correct direction, and the triangle cap of the strip should be pressed down into the profile groove. until. Because the rubber strip is an elastomer, it may shrink after being rolled. The correct method should be to retract the two ends of the rubber strip toward the middle when the door and window sealing strip is installed at the two-end interface, and leave 2— 3 cm of shrinkage margin, then cut and embed.

Previous article:
Energy-saving sealing strip
Sponge foam seals popular science
Next article: