Although the foamed rubber sealing strip is a small part of the mechanical equipment, it can ensure that the switchgear is stable and heavy, and it can also protect it from weather, dust, heat, sound, and decoration of the edges of the doors and windows. effect. When the mechanical equipment is subject to vibration and distortion, the sealing strip also plays a buffering, shock-absorbing and maintenance glass effect. The effect of small adhesive strips is great, let's take a look at the common sense of sealing rubber strip maintenance.

1: Check for large cracks and cracks in the rubber foam seal. If the sealant cracks, it can be repaired with adhesive. In particular, the use of special adhesive for sealing rubber strips can easily repair large cracks. Of course, if the sealing tape is severely damaged or aging, it is best to replace the new sealing tape with less effort.

2: After cleaning the door and window sealing strips with car detergent, the mechanical equipment is best coated with a high-permeability maintenance agent, which can prevent the sealing strips from aging and greatly improve the sealing performance of the sealing strips. In addition, the gaps between the sealing strips are simply stuffed with dust and then cause rust. For this reason, you should use a brush to remove sand and dust.

3: Equipment sunroof is the basic equipment of most domestic cars. When the car sunroof is opened, the rubber seal track is exposed to the air, which will inevitably accumulate dust and even run into small gravel. Prolonged use may cause the sunroof to deform due to wear and block the drainage holes. Therefore, it is very important to regularly organize the trajectory and modify the lubricant for the trajectory.

4: The windshield of the device is damaged. Remember to check whether the seal is damaged. Because the window usually does not return to its original shape after being repaired, in addition to ensuring that the window glass can be easily pulled or lifted, attention must also be paid to the tightness around the window glass. If the gap between the glass and the glass notch is uneven, and the rubber strip is not in good contact with the glass or glass groove, the owner can easily pull the sealing strip off by hand.

5: The rubber foam sealing strips of the equipment door and body are more stringent. In addition to the sealing function, it also has the effect of sound insulation and noise reduction of the car. Frequent door opening and closing. Therefore, it is necessary to check regularly to see if there is any drop. The key viewing area is also the corner of the seal, which is very easy to drop.