Let's take a look at the installation method of wooden door seals today. 1. First, clean the surface to be pasted, so that the surface is clean, smooth, flat and dry. 2. Measure the height of the doors and windows. Press this to cut off the seal with scissors. 3. Peel off a small piece of backing protective paper, install the sealing strip in the correct position and squeeze it tightly, and try to align it with the top edge. 4. Continuously peel off the back protection paper, so that the sealing strip extends downward along the frame and is constantly pressed. Be careful not to stretch. 5. Use the same steps to install the horizontal sealing strip, pay attention to the fit at the corner interface, and there should be no gap between the joints.