Steps for 3M Tape to Make Sealing Strip and Stick Door
2022-05-11
Steps for 3M Tape to Make Sealing Strip and Stick Door
I would like to introduce the steps of 3M adhesive tape to make sealing strips and stick the door, as follows:
1. In general, the width of 3M tape is about 25mm, while the width of sealing strip is about 8mm, so 3M tape should be evenly cut into 3 strips.
2. Stick 3M behind the sealing strip, then cut off the rest and stick it together, so that it can be stuck 3 times.
3. Wipe the door clean before sticking the sealing strip with 3M adhesive tape. Stick a sealing strip of the door first, tear off the protective paper of 3M adhesive tape while sticking it, try to align it, and remember to press it with your hand after sticking it.
4. Check the effect after pasting. The 3M adhesive tape sealing strip cannot be pulled off directly by hand. It can only be torn off by force from one side to prove that it has been pasted. It doesn't matter if it is pasted wrong, because 3M adhesive tape won't leave marks on the car door.
Previous:
Recommend News
About the advantages of rubber sealing strip
Photovoltaic panel sealing strip
Online Message
We will contact you within one working day. Please pay attention to your email.
Fast track
Contact Us
Contact:Manager Pan
Mobile: 86-1873318111
Telephone:0319-3252988
E-mail:contact@fmseal.com
Address:Yahu Industrial Zone, Weixian County, Hebei Province
