How to install the door strip
2022-03-03
The installation method of the sealing strip is very simple, that is, the rubber strip on the sealing strip can be pasted on the door.
The specific steps are as follows:
1. Wipe the paste part clean;
2. Tear off the adhesive film of the sealing strip;
3. Paste the sealing strip to the installation part along the interior frame;
4. Cut off the excess rubber strip with scissors.
Note: When pasting, be sure to ensure that the surrounding environment is dry and dust-free. If the climate temperature is lower than 10°C, it is best to use the hot air of a hair dryer to heat the vehicle installation part and the adhesive part of the sealing strip before pasting. At the same time, after pasting it, use the hot air of the hair dryer to heat it again, and press it properly by hand to ensure its adhesion is firm. In order to ensure the reliability of later use, the sealing strip should be avoided from rain and exposure to the sun within three days after installation.
When installing the car sealing strip, tools are required. It cannot be installed without tools. Installation method:
1. First stick the three rubber strips on the glass. Now both the glass and the strip are equipped with an opening in the metal plate of the cab;
2. It is necessary to pass through the gap between the three ports. Wearing it is to integrate the three-port sealing strip and the glass cab. If you need to put the three-port core into it, you need tools;
3. Some shops that sell tools sell them. The appearance of the tool is (one-word tool) there is a hole in the curved part of the tool head, which is to let the three cores into it and jam the three cores and push hard to install it.
Previous:
The next one:
Online Message
We will contact you within one working day. Please pay attention to your email.
Fast track
Contact Us
Contact:Manager Pan
Mobile: 86-1873318111
Telephone:0319-3252988
E-mail:contact@fmseal.com
Address:Yahu Industrial Zone, Weixian County, Hebei Province
