Guarding home life, do you lack one thing, that is aluminum alloy door and window sealing strip. Windproof, dustproof, rainproof, sealed, energy-saving, and sound insulation allow you to experience worry-free home life and give you a safe haven.

Aluminum alloy doors and windows are usually provided with notches and pressure strips of sealing rubber strips. It is to make the glass and the frame fan closer through the rubber strip between the fan and the frame, so as to obtain the air tightness of the doors and windows. There are certain requirements for the installation of sealing strips, which is reflected in that their contact parts must be flat, not curled, not stretched, the joint is less than 1mm, and the model must be completely matched with the reserved gap between notches and doors and windows. If it is too large or too small, corresponding problems will occur. Next, let me teach you some common sense of aluminum alloy door and window sealing strips, and help you choose the right sealing strips, so that you can rest and play at home with peace of mind.

Aluminum alloy door and window sealing strip is divided into two kinds of glass sealing strip and wool top. Of course, the sealing strip material should use non-toxic, tasteless and environmentally friendly special sealing strip. The wool multi-loading mainly plays the role of windproof and dustproof. The specifications must be matched. If the wool is too large or the wool is too high, it will cause assembly difficulties and increase the movement resistance of doors and windows, especially the initial resistance of opening and closing resistance. If its specifications are too small, the height of the vertical wool strip cannot be removed from the groove, which will greatly reduce the sealing performance of the doors and windows.

When it comes to sound insulation effect, of course, the glass sealing tape is relatively excellent. The previous single-layer glass may not be ideal, but the appearance of hollow glass and hollow laminated glass immediately greatly enhances the sound insulation effect. Therefore, the selection of aluminum alloy door and window sealing strips for sound insulation depends on their respective needs. After all, everyone's requirements are different.

Now to add a little knowledge, in the choice of aluminum alloy doors and windows sealing strip, we can through its surface to identify its good or bad. Some of the relatively cheap sealing strip fillers on the market will be relatively many, so its surface will not be very bright, very cheap appearance is not bright we can not choose. This is the legendary cheap no good goods. Then we can also look at the section joint of the aluminum alloy door and window sealing strip, whether the brightness is close to the surface color of the sealing strip. If it is close, it means that there is not much filler in the sealing strip material, then we can buy it. Little knowledge today, do you understand?